Wanted to know how you can connect your desktop with Hp printer? Then read this full blog and get your answer. Here you will get to know how you can connect a wired Hp printer with your windows. Just follow these steps and connect your device with your desktop. However, if you have any issues regarding connections, dial our HP customer support number. We are always there to help you.

HP Technical Support Number +1-855-219-8503

Follow these Crucial Steps to Connect Wired Hp Printer on Windows

Step 1

Place your hp printer near the desktop: Make sure your hp printer close enough to the desktop so that wire can reach easily to the pc without straining tension.

Step 2

Now Turn on Your Hp Printer: Press on the power button of the printer. Before that, you must ensure that is plugged properly on the power source.

Step 3

Plug the Hp printer with your desktop with the help of USB Cable: Sometimes simple plugging with desktop, automatically set the up the printer making it ready for use.

HP Technical Help Number +1-855-219-8503

Step 4

Press Start Button on Windows: Otherwise, you can open start. For that, you have to click on the extreme bottom left logo displayed on the screen.

Step 5

Click on Settings Button: This button is present in the lower left side of Your Window.

Step 6

Press on Devices Button: After that, press on the button devices. This icon is present on the top side of the Settings Window.

Step 7

Click on Printers & Scanners Button: This icon will appear on the left side of your window.

Step 8

Press on Add a printer or scanner Button: This button will appear at the very top of the page.

Step 9

Click on the Printer’s name and click on Add device icon: This will actually tell you about the manufacturer of your printer. For instance, you will see “HP” on the screen of your window, along with the model name and number of your printer.

In any case, if you are not able to see the name of your printer, then click on the button Add a printer or scanner and follow all the instructions that will appear on your screen.

Step 10

Follow all the instruction appeared on-screen: Maybe it is needed to customize your settings before making your hp printer ready for processing. Hence, follow all the on-screen instructions. Once you are done with all these instructions, it is available for use. However, if you are not able to connect your devices even after following all these steps, then you can contact us on our HP customer service number. We will solve your problem in nick of time.


HP offers a variety of features from their printers, one of which includes Wireless printing. WIFI is used for print in a wireless environment. Customers generally face the problem of connecting the printers with the WIFI. The main focus of this blog is to help those customers.


1. Compatibility of the devices

Make sure that your computer and network are compatible. In order to use HP Auto Wireless Connect, your computer and network configuration must meet the following requirements.
Your computer must be running Windows Vista or later (PCs) or in an IOS device.
Your computer is connected to an 802.11 b/g/n wireless router i.e your Home or your office wifi.
Your computer must use a wireless connection to your network and the operating system. Your computer must use a dynamic IP address, not a static one.

2. Make sure your printer is installed on your computer. All you need to do is connect the printer to your computer via USB cable and allow it to install its software, though many printers also come with installation CDs.

3. Make sure your printer is connected to a power source, then press the Power button.

https://www.hptechnicalhelpnumber.com/how-to-connect-wifi-to-your-hp-printer/  4. Select setup, This option’s location, and appearance will vary depending on your printer, but it most often characterized by a wrench and/or a gear.

  • You may have to scroll down or to the right in order to find the Setup option.
  • You may have the option to select Wireless as well. If so, tap Wireless instead.

5. Select Network, Doing so will open the wireless settings.

6. Select the network wizard, This will prompt the printer to begin searching for wireless networks.

  • You may select Wireless Setup Wizard here instead.


7. Select your network name. This should be the name that you assigned to your wireless network when you created it.

If you didn’t set a network name when you set up your wireless network, you’ll likely see a combination of your router’s model number and manufacturer name instead.

If you don’t see your network’s name, scroll down to the bottom of the page, select the field there, and enter your network’s name.

8. Enter your network’s password This is the password that you use to log onto your wireless network.

If your router has a WPS button on it, you can instead press and hold this button for three seconds.

9. Select done, This will save your credentials. The printer will begin attempting to connect to the network.

10. You should now be able to print over your wireless network.

  1. Check your printer. If you want to print wirelessly from your laptop, you have two basic options when it comes to installing an HP printer: You can either install a network printer that connects directly to your home network, or you can share a printer that is connected to another computer on your network. The option you choose will likely be dictated by the connections that your printer supports, as well as your home network setup.
  2. Most modern Hp printers will connect to your home’s wireless network. Some network printers can only connect via Ethernet cable. Older printers or budget printers will likely need to be connected to a computer via USB and then shared on the network.
  3. Examine your network and needs. Printers that are connected directly to the network can typically be easily accessed by both Windows and Mac laptops. Printers that are connected to a computer and then shared on the network are easily accessed by computers running the same operating system family (Windows-to-Windows or Mac-to-Mac), but get a little trickier when sharing across operating systems. Since it requires fairly different steps.5ab45c76b4f9311f6cae536ad3d0b70b

    • Installing the printer directly to the network is almost always the better choice if possible. Not only does it allow for easier connectivity, but it also means that the printer is constantly available. If you are sharing a printer that’s connected to another computer, that computer will need to be turned on in order to access the printer.

Printing to a Network Printer

  1. Connect your printer to your home network. The process for this will vary from printer to printer.

    • If you are connecting your printer via Ethernet, connect the Ethernet port on the printer to an open port on your router or network switch. This is typically all you’ll need to do for an Ethernet printer.


    • If you are connecting a wireless HP printer, you’ll need to use the printer’s display screen to connect to your wireless network. You’ll need to select your wireless SSID (network name) and enter the password if it is secured. The exact process will vary depending on the printer, so refer to your documentation for exact instructions.
  2. Connect to the network printer (Windows). Once the HP printer is installed on the network, you can connect to it from your laptop. These instructions work for all versions of Windows.

    • Open the Control Panel. You can access it from the Start menu. Windows 8 users can press the  Win key and type “control panel”.


    • Select “Devices and Printers” or “View devices and printers”.


    • Click Add a printer.


    • Select “Add a network, wireless or Bluetooth printer”. Windows 8 users will not need to select anything.


    • Select your network printer from the list of available printers. Follow the prompts to install the drivers automatically. If Windows cannot find the correct drivers, you may need to download them from the printer manufacturer’s support site.


  3. Connect to the network printer (Mac). Once the printer is installed on the network, you can connect to it from your laptop. These instructions work for all versions of OS X. Note that the network printer must support AirPrint or Bonjour (nearly all modern network printers do).

    • Click the Apple menu and select “System Preferences”.


    • Select the “Print & Scan” option from the System Preferences menu.


    • Click and hold the “+” button at the bottom of the list of installed printers.


    • Select your network printer from the list of nearby printers. If your printer isn’t listed, you may need to download the software from the printer manufacturer’s support site first.


    • Click the Download & Install button if it appears. While OS X comes with the software for most printers already installed, your printer may require additional software from Apple. If it does, you will be prompted to download it after adding the printer.